ประวัติ MR2 จาก answers.com ได้ความรู้ดี อ่านเอาไว้แข่งแฟนพันธุ์แท้ MR 2 ได้ครับ

การสนทนาใน 'MR2 Club' เริ่มโดย kaltech, 5 กรกฎาคม 2007

< Previous Thread | Next Thread >
  1. kaltech

    kaltech New Member Member

    141
    1
    0
    From www.answers.com

    The Toyota MR2 is a two-seat, mid-engined, rear wheel drive sports car produced by Toyota from 1984 until July 2007 when production stops in Japan, in three different design series. The latest version was called the Toyota MR-S in Japan, the Toyota MR2 Spyder in the United States, and the Toyota MR2 Roadster in Europe. When said in French, the name MR2 [ɛm ɛʀ ˈd&oslash;] sounds like est merdeux [ˈmɛʀd] (fr: is terrible, s**t and hell). Thus, the car was sold there only as the MR. In English, the MR2 is frequently called the "Mister Two."

    It is a common misconception that the MR2 was Lotus-designed but assembled and distributed by Toyota. In actuality the Lotus M90 (a.k.a. the X100) project was scrapped after a single prototype was built and Lotus was later bought out by General Motors, ending its relationship with Toyota (until Lotus' decision to source a Toyota 2ZZ-GE engine for its second-generation Elise). The MR2 was designed by Toyota with Lotus engineer Roger Becker involved on its suspension and handling. With its mid/rear engine and small size, the MR2 is often compared to more exotic sports cars.


    Origins
    The MR2's life began in 1976 when Toyota launched a design project with the goal of producing a car which would be both enjoyable to drive, yet still provide decent fuel economy. Initially, the purpose of the project was not a sports car. The actual designwork began in 1979 when Akio Yoshida from Toyota's testing department started to evaluate different alternatives for engine placement and drive method. It was finally decided to place the engine transversely in the middle of the car. The result was the first prototype in 1981, dubbed the SA-X. From its base design, the car began evolving into an actual sports car, and further prototypes were tested intensely both in Japan and in California. A significant amount of testing was performed on actual race circuits such as Willow Springs, where former Formula One driver Dan Gurney tested the car.

    Toyota made its SV-3 concept car public in the autumn of 1983 at the Tokyo Motor Show, gathering a huge amount of publicity both from the press and the audience. The car, scheduled to be launched in spring 1984 in the Japanese market under the name MR2 (initially standing for "Midship Runabout, 2-seater" but later claimed to be "Mid-engine, Rear-wheel drive, 2-seater"), was to become the first mass-produced mid-engined car to come from a Japanese manufacturer.


    First generation (AW10/AW11), 1985-1989
    First generation

    Production 19841989
    Body style 2-door coupe
    Engine 1.6L 115 hp I4
    1.6L 145 hp I4
    Transmission 4-speed automatic
    5-speed manual
    Wheelbase 91.3 in
    Length 155.5 in
    Width 65.6 in
    Height 48.6 in
    The small and light MR2, designated AW11, was perhaps something no one had expected from any of the Japanese car manufacturers, known for their economical and practical cars. The two-seat MR2 was definitely not practical as a family car, but the design criteria were different from that of most previous cars. The most important features of the AW11 were its light body (as low as 2,200 lb in Japan and 2,350 lb in the US), superior handling and relatively powerful, small-displacement engine. Thanks to these features, the AW11 is considered by many to be very enjoyable to drive. Its behavior mimics that of highly expensive supercars and is easy to control and nimble in its movements. Toyota's cooperation with Lotus during the prototype phase can be seen in the AW11, and it owes much to Lotus's legendary sports cars of the 1960s and 1970s.

    As a powerplant, Toyota chose to use the 4A-GE 1587 cc I4 engine with two overhead camshafts which allowed the use of 16 valves for a better gas flow through the combustion chamber. The engine was also equipped with a Bosch L-Jetronic type multi-point fuel injection and a variable intake geometry (T-VIS), giving the engine a maximum power output of 128 hp (95 kW). US engines were rated at 112 hp (84 kW), European engines at 124 hp (93 kW), Australian engines at 118 hp (88 kW) and Japanese engines at 130hp (97 kW). The engine had already been introduced earlier on the Toyota AE86, gathering a lot of positive publicity. This engine was the first mass-produced 4 valve/cylinder engine. There was also a JDM model AW10 which used the more economical 1452 cc 3A-U engine, but it didn't gain too much popularity.

    For the 1986 model year, the AW11 went through several changes which affected both its looks and performance. The most important addition was probably having the option of a removable t-top, not available in the US until the next model year. The exterior was modified by color-coding the bumpers and side stripes, adding small side skirts and a translucent spoiler to the rear of the roof. Other new options included a leather interior and a four-speed automatic transmission. Some further changes were made to the exterior the following year, but more notable were the addition of larger brakes and a heavier and stronger C52 transmission which replaced the older C50. The significance of the introduction of this newer transmission is readily apparent today, as the C50 is known to develop a fifth gear popout problem as it ages.

    Also noteworthy is the lack of a rear anti-sway bar after 1985 (though some 1989 models were equipped with them again). Models with the rear bar are considered more valuable to those who enjoy racing. Retrofitting a car not sold with an OEM rear bar can be either simple or complex. Toyota reportedly continued manufacturing strut towers with the proper rear sway bar mounting tabs until well into the 1986 and possibly 1987 model years, but no actual numbers or cut-off dates are available.

    In 1987,(1988 for the US market) Toyota brought a new choice for an engine for people longing for more power. Based on the same block and head, the 4A-GZE was equipped with a Toyota C-12 roots-type supercharger and Denso top mount intercooler. The compression ratio, valve timing and ports were modified. The engine produced a maximum power of 145 hp (108 kW) and accelerated the small car from 0 to 100 km/h (0 to 62 mph) in 6.7 to 7.0s. In addition to the new engine, the MR2 SC was also equipped with stiffer stabilizer bars and reinforcements in the bodyshell to improve rigidity. Unfortunately, this model was never sold in European markets, although some cars were privately imported.

    The press received the AW11 with open arms and praised its innovation, great feeling, and responsive engine. American car magazines Road & Track and Car and Driver both chose the AW11 on their lists of ten best cars which included some tough competition, such as the Ferrari Testarossa. The Australian Wheels magazine chose the 1988 AW11 as its favourite sports car. The MR2 was Motor Trend's Import Car of the Year for 1985. In 2004, Sports Car International named the MR2 number eight on the list of Top Sports Cars of the 1980s. The MR2 was on Car and Driver magazine's Ten Best list for 1986 and 1987.


    Second Generation SW20) 1989-1999
    Second generation

    Production 19901999
    Body style 2-door coupe
    Engine 2.2L 135 hp I4
    2.0L 200 hp I4
    Transmission 4-speed automatic
    5-speed manual
    Wheelbase 94.5 in
    Length 164.2 in
    Width 66.9 in
    Height 48.6 in

    MR2 SW20 sporting a Ferrari F355 bodykitThe MR2 went through a complete redesign in 1989, when the new Mark II body was produced. The new MR2, designated SW20 (in America the chassis codes were SW22 for the turbocharged model and SW21 for the naturally-aspirated model), was longer, wider and heavier than its predecessor and had smoother bodylines. While the AW11 was a pure sports car, made in the spirit of Lotuses, the SW20, being quite larger, could be classed as a GT-car. Since the resemblance between the Ferrari 348tb and the Ferrari F355 and the new MR2 was quite striking, the SW20 is sometimes referred to as a "poor man's Ferrari". Indeed, many bodykits became available to make the SW20 imitate the Ferrari F355 with, sometimes, indistinguishable effects.

    When the SW20 went on sale in spring 1990, it was offered with four different engine choices depending on the market area. All engines were 1998 cc I4 engines with DOHC and 16 valves, excluding the naturally-aspirated US model which used the 2164 cc 5S-FE engine. The most powerful engine was the turbocharged 3S-GTE, which was available in Japan at 220 hp (164 kW) (as the MR2 GT) and the USA at 200 hp (149 kW) (as the MR2 Turbo). Europeans had to settle with the naturally-aspirated 156 hp (116 kW) 3S-GE engine. The Japanese MR2 GT model (MR2 Turbo in the US) was able to accelerate from 0-100 km/h in 5.9 to 6.2 s.

    Keeping with the unique styling cues of the MK-I, the MK-II was offered with several choices of roof type for U.S. sale. Standard in the lineup was a hardtop coupe. Optionally you could order the car with either a T-top roof (commonly referred to as the T-bar option) or a moon roof option. The T-top option on early model MK-II vehicles was commonly known to leak after several years of operation.

    The SW20's entry to the market was not quite as smooth as the AW11's. Toyota's goal was to make the car's suspension geometry work the same way that true supercars do. This made the SW20's cornering abilities quite excellent, but it was much too easy for an inexperienced driver to make a mistake, leading to sudden oversteer (also called "snap oversteer") which can result in a spin unless the driver reacts both quickly and correctly. This trait was not considered very desirable among the press, because the MR2, unlike expensive supercars, was priced so that even "average people" were able to buy one. Some magazines stated that the SW20 was downright dangerous to drive.

    To respond to the feedback they had received, Toyota changed the 1993 model to include wider rear tires and changed the rear suspension, mainly the vehicle's height, shock absorbing properties and longer rear toe links, so that the car would be more prone to understeer, thus making it more difficult to push the car into "snap oversteer". Along with the suspension changes, the SW20 also got new 15" wheels to fit the larger brakes that were also introduced. Some shifting problems which affected the first revisions (1990-1992) were remedied with stronger dual synchronization rings.

    The next big change occurred in 1994, when Japanese SW20's received all-new engines for each model and some considerable changes to its exterior. For Japanese market cars, the3S-GTE switched to the use of a MAP-sensor (as opposed the Air Flow Meter (AFM)), in addition to the removal of T-VIS in favor of smaller intake ports and a new CT26 (sometimes going by the misnomer CT20b) turbocharger running an increased turbo boost pressure increased the maximum power to 245 PS (180 kW). The normally aspirated 3S-GE received fewer changes but still improved its maximum power to 172 hp (128.3 kW). The US market still received the 200hp variant from 1991-1995. New round taillights and a color-coded center panel replaced the old square-shaped lights and the rear grille. The original three-piece rear spoiler was replaced with the lighter one-piece spoiler which attached only to the trunklid. The side stripes and skirts were also color coded, and the "dot matrix" pattern on the glass was replaced with a solid pattern. The steering wheel was also replaced with a slightly smaller model, now universally shared across many Toyota models (the "MR2" insignia was replaced with the Toyota symbol). 1995 was the last year Toyota sold the Mk II in North America. In 1996, the front and side signals were changed to use a clear lens but no other modifications were made. The 1998 model, known as the "Revision 5" model, came modern looking 5 spoke 16" alloy wheels, a more aggressive spoiler, and a leather shift knob with red style baseball stitching.

    On the SW20's last production year in 1999, the car was updated with a few significant changes. While the turbocharged engine remained the same, in JDM models the normally aspirated 3S-GE engine was equipped with Toyota's VVT-i system which allowed the timing of the intake camshafts to be modified according to the engine's rotation speed and load. This, and some other changes improved the engine's power output to a respectable 198 PS (148 kW). All models also received new wheels, optional Recaro seats, and a three-way adjustable rear spoiler.

    The SW20 has become a major collector's car since the 2003 Ultimate Street Car Challenge win of Brad Bedell and his yellow V6-powered MR2. The 1MZ-FE motor, that comes from the V6 powered Solara and Camry, has quickly become a popular modification as the expense of switching to the V6 motor is roughly in line with installing a turbocharged motor into a formerly naturally aspirated car.


    SW20 TRD2000GT
    In 1998, Toyota Racing Development [2] offered an official kit body conversion and tuning program for MR2 owners to transform their existing SW20 MR2 into a widebody TRD2000GT kit replica car. This was to pay homage to the wins by their TRD2000GTs in the GT-C Japanese racing series, the TRD2000GT racing series cars were based on the SW20 floorpan. Toyota also did the same with their Supra Twin Turbo model, offering a conversion service to transform these cars into a TRD3000GT[3].

    In order to ensure exclusivity, a high price tag was charged and total of just 35 factory car conversions where completed by Toyota Technocraft Ltd. Each official Technocraft car converted was made using lightweight fibreglass components (in place of heavy steel original parts: front fenders, trunk lid extension, rear quarter panels, gas door, front and rear bumpers, 3-piece wing) and re-classified as completely new cars (with their own specially numbered TRD vin plate riveted to the body to indicate their authenticity and rarity).

    All Toyota Technocraft Ltd. TRD2000GT's had a 60 mm (2.4 in) wider front and rear track (due to the addition of wider wheels and tires) which improved handling considerably over the original equipment. Virtually every car converted also had other TRD parts fitted too including extensive changes to both the suspension and engine. Most cars left the factory making more power due to TRD bolt-ons, some cars even left the factory boasting up to 500 PS (493 hp/368 kW) and less than 1100 kg (2425 lb) for a very impressive power to weight ratio. While TRD Japan only offered a small number of kits with all body parts required for third-party conversion, Toyota Technocraft Ltd. offered complete car conversions.

    Only 3 complete Toyota Technocraft Ltd. cars are known to have been shipped into Europe with only 10 complete cars allocated to TRD USA for the entire American market. This makes these officially built Toyota Technocraft Ltd. TRD2000GTs the rarest of all MR2s and ultimately the most sought after and difficult to find. It is unknown how many original Toyota Technocraft Ltd.(non factory replica) cars still exist today, but it is known that a small number of conversion kits were imported from TRD Japan into the US for USDM Conversions. In many respects the extended body can be compared to that of a Porsche Turbo widebody. The car track width is extended and body dimensions dramatically changing the cars overall visuals, giving the car a "supercar" look, and also better handling and weight reduction. Very little is known about these cars outside of Japan.[4]

    Future
    For two decades, the MR2 has been a delight to car enthusiasts around the world, offering an affordable way to experience the marvelous handling of a mid-engine sports car. Toyota is cutting down its selection of sports cars and replacing them with less aggressive "sports packages" offered on their more sedate cars. Many had hoped that Toyota would continue MR2 production because the leap along the price-axis to the next alternatives (Porsche Boxster, Lotus Elise and Exige, Honda NSX) is so large that many enthusiasts would have to settle for a front-engined car, should the MR2 be discontinued. There was speculation that the 2005 model could be a hybrid car. However, the MR2 was discontinued after the 2005 model year. Recent sightings of Toyota testing a heavily disguised mid-engine roadster have led some car magazines to speculate that a new MR2 is in the works.[6]
     
  2. Piruwat

    Piruwat Member Member

    148
    2
    18
    ขอบคุณครับพี่กัล

    ปล. ไม่ค่อยเห็นโพสเลยครับ ช่วงนี้
     
  3. kaltech

    kaltech New Member Member

    141
    1
    0
    ก็ดูบรรยากาศและทิศทางลมอยู่น่ะครับ
     
    แก้ไขล่าสุดโดยผู้ดูแล: 5 กรกฎาคม 2007
  4. Piruwat

    Piruwat Member Member

    148
    2
    18
    เย้ยยย ..
     
  5. ArchFreeman

    ArchFreeman New Member Member

    5
    0
    0
    เครื่องแปลเสียพอดีครับ อิอิ
     
  6. SW-20->00GT

    SW-20->00GT New Member Member

    142
    1
    0
    ละเอียดยิบเชียวพี่ เเต่เซงจังน้ำมันเเพ๊งเเพง จะติดเเก๊สก็ไม่อยาก เติมโซฮอลก็มะได้ 91ก็ไม่ไหว เปลี่ยนรถก็ใช่เรื่อง เลยต้องทนกับลิตรละมื้อ
     
  7. Aee-ViPeR-MR2

    Aee-ViPeR-MR2 New Member Moderator VIP

    463
    6
    0
    น้ำมันแพงแต่ก้ยังดันทุรังขับอยู่ ยังดันทุรังเติม 95 อยู่ ใจรัก ฮ่าๆ แต่ไม่ได้ใช้รถทุกวันนะคะ :D
     
  8. DUKE_68

    DUKE_68 Well-Known Member Privilege

    6,189
    129
    63
    เพิ่มเติมครับ ทั้ง 3 GENERATION :D

    http://en.wikipedia.org/wiki/Toyota_MR2
     
< Previous Thread | Next Thread >

แบ่งปันหน้านี้