Reply to Thread

Message:: [QUOTE="zenon_pub, post: 216997, member: 42554"]mohawk uses kapton (plastic) voice  coil formers, they arent designed for high power....the voice coil formers BEND  and cause the coil to rub against the pole piece/magnet....ive returned 5 subs for claim already. :sad: they break very easily... mohawk also does not give a warranty for burnt voice coils....the second time you fry them. the boxes that mohawk comes in are also mislabeled...the box says 2 + 2 ohms....but they are really 4 + 4 ohms. mohawk subs also have a problem with the dust cap coming off....because there are no holes drilled into the pole piece to relieve pressure... the 2000 watt amps also have problems, the amps are double sided boards, but many of the solder joints are faulty joints, solder does not make contact through both sides for many of the components.....the 2000 watt amps  have problems with op amp #1 failing.... it will send a clipped DC signal to the output transistors, and fry all the output transistors... :sad: i stopped selling mohawk... nothing but headaches... :cry: and that salesman named 'A' is a prick...[/QUOTE]